Now you can visit Dow’s Textiles Landing page by scanning the QR code or click the link down be...
High-performance lubricants, heat transfer fluids and aircraft deicing fluids address key challenges for a wide variety of applications such as transmissions, axles, engines, metal processing, aircraft, food processing, electronics, commercial marine and gas turbines.
XIAMETER™ PMX-200 Silicone Fluid 1,000 cSt
Uses:
- Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols
- Various applications including cosmetic ingredient, elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent-based finishing and fat liquoring of leather
Benefits:
- Ease of application and rubout
- Ease of buffing
- Enhances color
- High water repellency
- High compressibility
- High shearability without breakdown
- High spreadability and compatibility
- Low environmental hazard
- Low fire hazard
Properties
These values are not intended for use in preparing specifications.
Typical Properties
- % Actives60-100 %
- Delivery SystemFluid
- DetackificationYes
- Dry CombingYes
- Flash Point, Closed Cup> 100 °C
- Flash Point, Open Cup> 326 °C
- FunctionalityDimethyl
- Hair ShineYes
- HydrophobicYes
- Improved SpreadingYes
- IncreaseGlide, Payout
- Kinetic / Kinematic Viscosity1000 Centistokes
- Low OdorYes
- Non-OcclusiveYes
- Pet and Animal Care BenefitsEase of Wet Combing / Detangling, Shine, Soft Feel / Dry Conditioning
- pH Effectiveness Range3-10
- Pour Point-50 °C
- ReduceWhite Residue
- ReducedGreasiness, Tackiness
- Refractive Index1.4035
- Service Temperature High200 °C
- Service Temperature Low-40 °C
- Soft Feel Conditioning - DryYes
- Specific Gravity @ 25°C0.97
- Surface Tension (1% actives, 25 °C)21.2 mN/m
- SystemReady-to-Use Non-Aqueous, To-be-Formulated for Aqueous
- Thermal Conductivity0.159 W/m・K
- Use TemperatureBelow 90C
- VolatilityNon-volatile
- Wet CombingYes
XIAMETER™ PMX-200 Silicone Fluid 1,000 cSt
Uses:
- Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols
- Various applications including cosmetic ingredient, elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent-based finishing and fat liquoring of leather
Benefits:
- Ease of application and rubout
- Ease of buffing
- Enhances color
- High water repellency
- High compressibility
- High shearability without breakdown
- High spreadability and compatibility
- Low environmental hazard
Properties
These values are not intended for use in preparing specifications.
Typical Properties
- % Actives60-100 %
- Delivery SystemFluid
- DetackificationYes
- Dry CombingYes
- Flash Point, Closed Cup> 100 °C
- Flash Point, Open Cup> 326 °C
- FunctionalityDimethyl
- Hair ShineYes
- HydrophobicYes
- Improved SpreadingYes
- IncreaseGlide, Payout
- Kinetic / Kinematic Viscosity1000 Centistokes
- Low OdorYes
- Non-OcclusiveYes
- Pet and Animal Care BenefitsEase of Wet Combing / Detangling, Shine, Soft Feel / Dry Conditioning
- pH Effectiveness Range3-10
- Pour Point-50 °C
- ReduceWhite Residue
- ReducedGreasiness, Tackiness
- Refractive Index1.4035
- Service Temperature High200 °C
- Service Temperature Low-40 °C
- Soft Feel Conditioning - DryYes
- Specific Gravity @ 25°C0.97
- Surface Tension (1% actives, 25 °C)21.2 mN/m
- SystemReady-to-Use Non-Aqueous, To-be-Formulated for Aqueous
- Thermal Conductivity0.159 W/m・K
- Use TemperatureBelow 90C
- VolatilityNon-volatile
- Wet CombingYes
New Sustainable Innovation from Dow Textiles
SILVADUR™ Fact You need to know
The Technology SILVADUR™ uses a patented polymer technology to deliver silver ions via an “inte...
(021) 5431 9688 (hunting)
(021) 5431 9689
cs2@bio-polytech.com